Phanteks Dual Heat Pipe CPU Cooler
Avoid overheating and breakdowns with the Phanteks Dual Heat Pipe CPU Cooler. Equipped with an aluminum heat sink using copper base heat pipes and dual 140mm fans with UFB Bearing, it distributes a balanced airflow keeping all the components cool. The 900-1200 RPM fans diffuse heat with 78.1 CFM of airflow. It is also designed with 19dBA noise level for a silent functioning and shows 150,000 of life hours. It is compatible with Socket LGA 2011, 1155, 1366, 1156, 775; Socket AM2, AM2+, AM3 types. Order the Phanteks Dual Heat Pipe CPU Cooler today.
What It Is And Why You Need It:
|Fan Type||CPU Fan|
|Bearing Type||UFB Bearing|
|RPM||900 ~ 1200 RPM +/- 10%|
|Air Flow||78.1 CFM|
|Noise Level||19 dBA|
|Heatsink Material||Aluminum & Copper Base|
|Power Consumption||1.8 W|
|Heatsink Dimensions||134 x 140 x 160mm|
|Life Hours||150,000 Hours|
Have an opinion on this product that you would like to share? If, so please take a few moments to write your rating and review.Write your own review
This puppy is a behemoth, but it will chill your processor nice. One word of advice though... The included instructions are bad so watch the installation video on youtube before you attempt to put this thing on. It will save you some trouble.
Using this on an OC system and have never seen the CPU temp climb near the limits. Make sure your memory and case have room for this thing because it's very tall. Only drawbacks that I can see is that the fans are white. I think that since you can get the radiators colored that the fans should be too. I would also like to be able to get the PWM converter cable. Speed control from a PWN motherboard would be nice.
Will NOT work on Rampage IV with Corsair Vengance
Fan looks like it works really well, but I should have done more homework. This cooler will not fit the Asus Rampage IV Extreme board using Corsair Vengeance Ram. The really high cooling fins on the Ram contact the fins of the CPU cooler well before the base touches. There is no way to modify it to fit. I tried removing some of the fins on the CPU cooler but the cooling fan still makes contact. I believe this problem will occur with any RAM that is not stock height.
Great CPU cooler
It's one of the best rated CPU coolers out there. Just be mindful when buying this and others like it, it's huge. When you decide to buy this make sure your ram are low profile if you're using all 4 mem slots it will not fit with high profile memory such as Corsair Vengeance.
11 Harbor Park Drive,
Port Washington, NY 11050.